What Minerals Are These? Found By An Old Mine

2022.01.27 21:00 MagicMarmots What Minerals Are These? Found By An Old Mine

Any idea what minerals/types of ore these are? I found them lying around a cluster of old mines in eastern Nevada and was blown away by how heavy some of them were. Some of the black ones easily weighed 3-5x as much as similarly sized pieces of granite. I’m not a rock hound (yet), but I’m curious!
Pictures: https://imgur.com/a/ej3ipuY
submitted by MagicMarmots to rockhounds [link] [comments]

2022.01.27 21:00 LeonDR99 Why don't I have 100% Habitability? Am I missing something?

Why don't I have 100% Habitability? Am I missing something? submitted by LeonDR99 to Stellaris [link] [comments]

2022.01.27 21:00 dead_chicken When Should I Transplant My Potted Chicago Hardy?

We finally had actual winter weather so my fig's currently hanging out in the garage. I have a bigger pot for it to go into, but am wondering when the right time to transplant is.
Should I wait until March when it (hopefully) will start to wake up?
submitted by dead_chicken to Figs [link] [comments]

2022.01.27 21:00 vanderbilt3 How do I know if I’m actually ready to date?

I’m a 20M dude who’s never done an ounce of dating in my life. In fact, I’ve barely had friends that are women. Currently, I go to a university (graduating Fall 23). Throughout my entire childhood to high school, I’ve been very introverted and afraid to go do things outside of my house. I would never hang out with my friends outside of school. My family is very religious so they have never really been supportive of dating and what not.
Im pretty shy around girls. Whenever I talk, I feel like im too afraid to crack a joke fearing it will come out bad or something so I tend out to drag out a conversation and it becomes boring.
Ever since I got to college though, I have become much more extroverted. I still don’t really talk to women but I become a lot more open to the boys and we’re really close and hang out a lot. Since the New Year started, I wanted to start looking into a relationship and changing some other things about my lifestyle. I wanna start working out (I’m skinny, weigh only 150, and am 5’5). Feel like my height is kind of a disadvantage but I’ll have to live with that I guess. I plan on eating more healthy and stuff, but this is all easier said than done. Going to school and doing all this is difficult for me considering I’m pretty lazy and procrastinate all the time.
Anyways, my main question is that I just don’t know if I’m even mentally or physically ready to be in a relationship. I’ve never had sex and I don’t even think I’ve ever even hugged a girl. I really want to date but how do I know if I’m ready? I already downloaded some dating apps but nothing eventful has happened (I don’t know if that’s cause my profile is bad or I’m just unattractive, my friends say that I’m not unattractive but that’s coming from a bunch of dudes). My mom actually told me when I came back home from break she wouldn’t mind me dating as long as we didn’t have sex until marriage and she was a certain religion.
submitted by vanderbilt3 to dating_advice [link] [comments]

2022.01.27 21:00 Advanced-Barber-8650 Russiankreammm

Russiankreammm submitted by Advanced-Barber-8650 to Russiankreammm [link] [comments]

2022.01.27 21:00 Voxiom_GAMING1 Voxiom GAMING hits level 100 :0 (Battle royale)

Voxiom GAMING hits level 100 :0 (Battle royale) submitted by Voxiom_GAMING1 to Voxiom [link] [comments]

2022.01.27 21:00 Moneyface300 Why do you think older music is still popular, but new music fades away quick?

submitted by Moneyface300 to AskReddit [link] [comments]

2022.01.27 21:00 sereniti81 977 (+28) hospitalized, 141 (+5) ICU; 13 deaths; '2,033 new cases'

977 (+28) hospitalized, 141 (+5) ICU; 13 deaths; '2,033 new cases' (more graphs to come)
38,899 British Columbians got a booster shot yesterday, as lower levels continue this week. And just 883 first shots for children 5-11, as we're seeing a major slowdown there as well.
submitted by sereniti81 to Coronavirus_BC [link] [comments]

2022.01.27 21:00 FakeAzureSkies How Do You See Vice?

I’m going to leave the question fairly broad cause I’m curious to see how you all feel about her. It’s a very random time to ask about the character but I’ve been curious about other’s opinions. I started to play the game again mostly because of the Kobayashi Crossover and when I did come back I was greeted by a an amazing yet fairly short cutscene that acts sort of like an excuse for why you’ve been gone for a while. Vice of course was the person there talking to you and since then I’ve seen her as less of a “waifu” and more of a best-friend/sister. I’ve always found Vice’s design a little too bland for my liking but her character is honestly great. The level of immersion put into this game to make me feel this way is on another level.
submitted by FakeAzureSkies to AlchemyStarsEN [link] [comments]

2022.01.27 21:00 xheiditvx Hi! Sweat Pants? Sure thing

Hi! Sweat Pants? Sure thing submitted by xheiditvx to crossdressing [link] [comments]

2022.01.27 21:00 Hmmark1984 Trying to adjust how much my MSDD extrudes when loading/unloading filament, what did i get wrong?

So I've had a MicroSwiss Direct Drive on my Ender 5 for a couple years now and as i was moving to a 5 plus i decided to see if Marlin 2.0 load/unload commands could be edited to take into account my direct drive setup so that the extruder doesn't turn as much/for as long as it thinks it needs to to drag the filament all the length of a bowden.
I was told this was possible and thought i'd set it up right but it's not quite working.
I've managed to get the load amount correct, i think, in that if i have filament sat right at the extruder gears when i click "load" then when it's finished the "purge" it has just started extruding the new filament for maybe a couple mm, nice and efficient.
However, I adjusted what i thought i needed to for the unload command, and despite someone else saying they only used 60mm, i'm tried up to 103mm on the

and it still doesn't retract the filament past the gears, meaning i have to pull back the arm on the micro swiss and yank the filament out. It seems like when i up the number it's not making much of a difference, is there a different figure i should be adjusting for this as it seems to say it should only need to be the distance of the full length of the nozzle on a direct drive and 103mm is way more than that?
/** * Advanced Pause for Filament Change * - Adds the G-code M600 Filament Change to initiate a filament change. * - This feature is required for the default FILAMENT_RUNOUT_SCRIPT. * * Requirements: * - For Filament Change parking enable and configure NOZZLE_PARK_FEATURE. * - For user interaction enable an LCD display, HOST_PROMPT_SUPPORT, or EMERGENCY_PARSER. * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ #define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_LENGTH 103 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 60 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif 
submitted by Hmmark1984 to ender5 [link] [comments]

2022.01.27 21:00 roovet Roovet Signature Exclusive Handbag Purse for Women

Roovet Signature Exclusive Handbag Purse for Women submitted by roovet to Tonyjamesnelson2nd [link] [comments]

2022.01.27 21:00 Corgi617 This is my OC, Dark’Leg! He is a med cat in wind clan!

This is my OC, Dark’Leg! He is a med cat in wind clan! submitted by Corgi617 to WarriorCats [link] [comments]

2022.01.27 21:00 shadowabsinthe Genichiro you beautiful bastard

I am currently playing Sekiro and this is my first play through, I beat Genichiro a week ago and while it was tough I managed to overcome it. Continuing on from him I reached an important decision and now I have to face a certain owlish character. I will preface this by saying I always hated parrying, in Bloodborne I always dodged and countered, in Souls I always blocked and countered. In any other games I never used counters I always opted for dodging but this game (especially 1 fight in particular) changed my mind.
This fight turned out to by my white whale, every strategy I tried he would spank me hard. Every fight I would use all 9 heals, pellets and resurrection before I even got him halfway to the second bar. I even got so aggravated I looked up a cheese method to try and beat him. It didn't work as he was so well rounded cheese methods didn't work either.
But then I took a step back, I realised the game had taught me how to fight with Genichiro and I should use that lesson instead of cheap gimmicks. I focused on parrying and counter attacking and I destroyed him with only 3 heals used and didn't need to resurrect.
The point of all this? From Software not only built an amazing but challenging game, but they changed my mind on parrying and made me "git gud" by forcing me to fight a boss that teaches you how to use to the parrying mechanic perfectly. They also made me up my skills but they did it in a way that it was achievable and rewarding instead of being hard for hards sake.
I will be taking these hard learned lessons to future games and Elden Ring when it comes out.
TLDR: Parrying sucks, Genichiro taught me, Owl spanked me, got good now everything makes sense.
submitted by shadowabsinthe to Sekiro [link] [comments]

2022.01.27 21:00 Downtown-Tackle-9219 3rd gen Rav4 CarPlay radio upgrade?

submitted by Downtown-Tackle-9219 to Rav4 [link] [comments]

2022.01.27 21:00 JJ_Banks Anyone else get made the safety guy in the office? Any tips? Safety topics to talk about at meetings?

So the original safety representative in our office for my mid size firm resigned after last year and after reluctance I stepped up. Basically the regional safety representative unloaded what feels like 100 gallons of water in the form of monthly, quarterly, and annual responsibilities and I feel somewhat overwhelmed and not sure where to start. Are there any other safety guys out there who can offer up some wisdom?
submitted by JJ_Banks to civilengineering [link] [comments]

2022.01.27 21:00 loxleymusic LOXLEY

submitted by loxleymusic to loxley [link] [comments]

2022.01.27 21:00 Padre_Pizzicato Cumulative pause time?

So did DD change how pausing a dash works? Seems like the time isn't being reset after each pause like it used to.
It also seems to put me into the standard pause if I decline too many in a row, instead of that temporary 10 minute pause screen.
Anyone else have the same experience now?
submitted by Padre_Pizzicato to doordash [link] [comments]

2022.01.27 21:00 All-Seeing-Bot Justice Breyer Calls the U.S. 'An Experiment' | Bloomberg Quicktake: Now

Justice Breyer Calls the U.S. 'An Experiment' | Bloomberg Quicktake: Now submitted by All-Seeing-Bot to NewsVidFeed [link] [comments]

2022.01.27 21:00 Sunyul-Kim Version Z missions part 2

Version Z missions part 2 submitted by Sunyul-Kim to DBZDokkanBattle [link] [comments]

2022.01.27 21:00 xViperAttack lets gooooooo guys!!

lets gooooooo guys!! submitted by xViperAttack to fut [link] [comments]

2022.01.27 21:00 nickotime1313 10 days until surgery, down to 7.5gpd

So, I have a shoulder surgery coming up (2nd one, fairly major) and I am working on tapering kratom to ensure my pain meds work as they will definitely be needed.
I was just wondering if anyone had been through this, how long they were off of kratom fowhat dose they were on prior to surgery, and how the prescription painkillers worked post-op.
I'm currently just below 8grams and have been under 10 for about 4 days. I can probably finish the taper quickly over the weekend or just CT, if that would be better. My surgery is not next Monday but the following, so I've got about 10 days left.
TIA for any stories or advice!
submitted by nickotime1313 to KratomKorner [link] [comments]

2022.01.27 21:00 NiftyDriftNFT Gas ONLY Mint!

Only gas to mint these cool cowboys! https://twitter.com/PixelCowboyz Mint one before they get expensive! https://pixelcowboys.community/mint
submitted by NiftyDriftNFT to NFTsGiveaway [link] [comments]

2022.01.27 21:00 Rvisluv Fifth date with this total hottie

So I matched with this guy a month ago and we’ve been on 4 dates so far. The fourth one happened to be at my place where we drank and watched some tv and made out and a little oral as wel. We would have gone all out if I wasn’t on my periods. I’m meeting him again this weekend mostly at his place. We will do the deed haha. But I want to go on more dates and him to take me seriously. How do I broach this topic? Usually guys relax after they get some sex and usually suggest “hanging out”. But I want him to consider me more than a hookup or casual and take me out on dates to places. What do I say or do??
submitted by Rvisluv to dating_advice [link] [comments]

2022.01.27 21:00 origionalgmf Not the best paint booth ever made, but it should get the job done

Not the best paint booth ever made, but it should get the job done submitted by origionalgmf to modeltrains [link] [comments]